Review of 660nm 50mW Red Dot Laser Alignment

  • Whenever users are looking for an easy operating and quick pointing dot measuring tool, it is not easy to reach with a simple red laser pointer, However, after constant technical innovation of 660nm red laser diode tech and good equipment with cooling system, it is developing into a quite practically used device of 660nm 50mW red dot laser alignment. It is performing with highly intense red laser beam emission from inner laser diode. Under condition that red laser module gets proper adjustment of beam focus and installation onto correct machine or device, it is just able to work with extremely clear and accurate red reference dot projection at long distance.


    The usual use of 650nm 50mW red dot laser alignment is different from a simple red laser pointer. It is getting good use of metal heat sink cooling system and import 650nm red laser diode, which is just getting increasing laser beam stability of at least 40%. Equipping with highly durable aircraft used aluminum alloy housing tube, without any affect by mechanical moving or calibration, this red laser module is getting perfect protection of itself from any mechanical moving or shocking etc. In addition, within wide range operating temperature of -10 degree to 45 degree Celsius, it is always keeping work with high quality red laser light source emission and clear enough red reference dot generation in constant use.
    Under operation with qualified glass coated lens, without any affect by other working condition of moisture or dust, 660nm 50mW red dot laser alignment is keeping work with high transmittance red laser beam emission, and no decay light dot measurement in continuous use. It just passes through quite strict laser beam stability tests. In genuine dot measuring work of 8 to 10 hours per day, red laser module is just working without any laser light decay or blur, but still keeping the clearest red dot generation within the maximum work distance of 25 meters.
    Owing to the most special use of APC, ACC driving circuit board, 660nm 50mW red dot laser alignment keeps work with constant output power and electric current supply. It makes sure of up to 85% laser beam stability under constant dot measuring work within 8 to 10 hours per day and more than 8,000 hours serving lifetime. When this alignment laser makes proper adjustment of laser beam focus and dot projecting direction within three dimensions, unless it is pointing under sunlight, it just achieves the most precise dot measurement. Under operation with high attention to powerful red laser radiation and correct wearing of laser safety goggles, this high power red laser diode module makes high security and high accuracy dot alignment constantly.